![](http://miraecnh.com/en/wp-content/uploads/sites/3/2021/10/prduct15-1.jpg)
Function
- – Increases heat transfer effect with 3/8″ inner grooved copper tube
- – Light and beautiful by painting the aluminum case
- – IP66 rated PVC TERMINAL BOX
- – Paint and powder coating harmless to human body and food, conforming to HACCP standards
- – Applied EC motor to save energy (30% energy saving compared to general motor)
- – Motor power is easily replaced with a socket and plug
- – Suitable for laboratory, progenitor culture lab, plant facilities
- – Dual heating and defrosting
Model name : TD-TYPE / Product name: Indoor unit (unit cooler)
![](http://miraecnh.com/en/wp-content/uploads/sites/3/2021/09/product_img_13.jpg)
Function
- – Copper tube: 3/8″ inner grooved copper tube
- – Case is aluminum embossed plate
- – Heater shares defrosting and heating functions
- – Prevents overheating and overcooling with a COCO2 temperature and humidity sensor
- – Specially designed terminal block is connected to the internal wiring, and external wiring is easily connected
- – Suitable for seed culture and inoculation facilities with no spread of contamination due to lightweight and low air volume and wind speed
- – Power supply 1ø 220V 60Hz
- – Integrated fan motor improves product reliability
- – Suitable as air conditioning for container growers
Model name : CMS-TYPE / Product name: Indoor unit (unit cooler)
![](http://miraecnh.com/en/wp-content/uploads/sites/3/2021/10/product17-1.jpg)
Function
- – Increases heat transfer effect with 3/8″ inner grooved copper tube
- – Light and esthetic painted aluminum case
- – Defrost method: A = natural defrost, E = electric defrost
- – Paint and powder coating used in the product are harmless to human body and food, conforming to HACCP standards
- – Power specification: MOTOR = 1Ph 220V, HEATER = 1Ph 220V / 3PH 380V
- – Suitable for plant cultivation, such as mushroom, hydroponics
- – Windless technology for wind-sensitive mushrooms
Model name : UNIT COOLER S-TYPE / Product name: Indoor unit (Hood type)
![](http://miraecnh.com/en/wp-content/uploads/sites/3/2021/10/product18-1.jpg)
Function
- – Increases heat transfer effect with 1/2″ copper tube
- – Various installation methods based on ceiling type
- – Optimized for plant and mushroom cultivation
- – Tidy finish with upper IN/OUT piping
- – Hood-type design maximizes mean range
- – Overheating/overcooling prevention
- – Prevents overheating and overcooling with a CO2 temperature and humidity sensor attached
- – Pitch pipe: Row=33mm / step=38.1mm
- – Aluminum embossed case exterior (light)
- – Maximize work efficiency with built-in expansion valve
- – Cooling unit for both cooling/heating
- – Optimized for incubation and growth